Aqua One Australia. Supply and service of drinking water filter systems, water coolers and bubblers since 1991. We know what we are talking about. Call (07) 3395 7122

 
Get Filtered!

680 Wynnum Rd,
Morningside, Brisbane, QLD

Omnipure CK series filter cartridge

Omnipure CK series filter cartridge

Omnipure CK series filter cartridge

Providing an alternative to higher priced replacement bodies.

Description

Description

The CK-Series was developed to offer our customers an alternative to higher priced replacement bodies designed to fit existing bayonet-style permanent heads. Made of highly durable injection-moulded polypropylene, the CK-Series is constructed from 100% NSF (National Sanitation Foundation) approved materials. Omnipure offers a variety of standard media options including granular activated carbon (GAC) for taste and odour reduction, depth filtration media to address sand, grit and sediment problems that can clog or damage down line equipment and a special blend polyphospate media designed to control the scaling associated with hard water.

carbon blocks utilizes new technology that optimizes surface area for better contaminant absorption. The OmnipureBlock™ is available in a high capacity, ten-micron activated carbon version and a water polishing, cysts reducing one-micron version. Additionally, OmnipureBlocks are available in an activated carbon/scale inhibitor version and a carbon/lead inhibitor version.

The CK-Series of replacement bodies from Omnipure...a reliable, efficient, cost-effective alternative to higher priced filter body replacements on the market.

These cartridges carry a maximum service life of approximately 1-year, dependent on usage and water quality.

Specifications

Please refer to the table below for a sample of the CK-Series cartridges we provide. For any further assistance please call us on 02 9458 1111.

ImageMediaSizeModelMicronQuality/removes
Carbon block 2.5” x 12” CK5620 1 Taste, odour, chlorine & cysts
CK5615 1 Taste, odour, chlorine, cysts
& lead
Phosphate/
carbon
2.5” x 12” CK5621-P 10 Taste, odour, chlorine reduction & scale inhibitor

Cartridge variations

Dependent on your specific filtration needs – Omnipure provide a range of cartridges specialized in removing particular contaminants.

Quality componentPrimary function
Carbon block Taste, odour, metals and cyst removal
GAC Taste, odour
Sediment Dirt, sand and all particulate matter
Phosphate/carbon Inhibits scale/lime build up
100% phosphate Prevents scale/lime build up

Fittings

Applicable for these filters are a range of heads that feature the varying threads applicable to your system. The following are available:

  • Valved 1/4” Head
  • Valved 3/4” Head
  • Non-Valved 1/4” Head
  • Non-Valved 3/8” Head

ThreadFitting available
1/4” Female RH Non-Valved, RH Valved, WL Non-Valved, WL Valved
3/8” Female Non-Valved
1/4” John Guest Tube RH Non-Valved, WL Valved, WL Non-Valved
3/8” John Guest Tube WL Non-Valved

Carbon filtering is a method of filtering that uses  activated carbon to remove contaminants and impurities, taste and odour using chemical adsorption.

Each granule of carbon provides a large surface area structure, allowing contaminants the greatest possible exposure to the active sites within the filter media. One pound (450 g) of activated carbon contains a surface area of approximately 100 acres (40 Hectares).

Activated carbon works via a process called adsorption, whereby pollutant molecules in the fluid to be treated are trapped inside the pore structure of the carbon . Carbon filtering is commonly used for water purification, in air purifiers and industrial gas processing. It is also used in a number of other applications, including respirator masks, the purification of sugarcane and in the recovery of precious metals, especially gold.

Active charcoal carbon filters are most effective at removing chlorine, sediment, volatile organic compounds (VOCs), taste and odour from water. They are not effective at removing minerals, salts, and dissolved inorganic compounds. Reverse Osmosis is the best filtration for dissolved compounds.

Typical particle sizes that can be removed by carbon filters range from 0.5 to 50 micrometres. However, the amount and quality of carbon is also very important factor. The particle size will be used as part of the filter description. The efficacy of a carbon filter is also based upon the flow rate regulation. When the water is allowed to flow through the filter at a slower rate, the contaminants are exposed to the filter media for a longer amount of time.

There are 2 predominant types of carbon filters used in the filtration industry: powdered block filters and granular activated filters. In general, carbon block filters are more effective at removing a larger number of contaminants, based upon the increased surface area of carbon. Many carbon filters also use secondary media such as silver to prevent bacteria growth within the filter. Alternatively, the activated carbon itself may be impregnated with silver to provide this bacteriostatic property.

Specifications

Package Contents

Download Brochure

Download the Brochures


More Images

Instructions

Customer Reviews