Depth 410 cm
Height 290 cm
Width 210 cm
The Waterworks IC8 is capable of cooling approximately
6*LPH (litres per hour) at 10°C.
Cooling Speed: From 27°C to 10°C, 21.6 minutes
Cooling Capacity: 5.8 litres/hour/10°C ± 2°C
Draw Off Capacity: 8 cups below 10°C
*Example of Water Temperature of 150ml cups
The IC8 cabinet is constructed of powder coated galvalume which provides the IC8 with an easy clean, corrosion resistant finish.
CHILLING & STORAGE TANK:
Constructed of stainless steel, it has a volume of 1.9 Litres, is fully insulated and independently tested to withstand over 800psi of static pressure. A drain plug and seal is provided, which is removable for servicing.
The internal waterlines are 1/4”OD stainless steel and are heliarc welded to eliminate corrosion.
This fan assisted, static condenser system utilises R134a refrigerant which is non toxic, non-flammable and non ozone depleting. Refrigerant flow is controlled by capillary tube, which has no moving parts. The compressor is protected by an automatic overload, is lifetime lubricated and hermetically sealed. The tube on tank style evaporator has six (6) windings around the storage tank for balanced, efficient cooling and the entire system is controlled by an adjustable, (factory preset), thermostat.
UBI - 5-12 people
UB2 - 12 -26 people
UB3 - up to 5 people
UB1 - .8 litres - 8 litres per hour
UB2 - 1.5 litres - 15 litres per hour
UB3 - .8 litres - 5 litres per hour
R134a refrigerant gas
Inlet an outlet 6.2mm 1/4 " OD tube
UB1 - 1/8 horse power nominal capacity
UB2 - 1/5 horse power nominal capacity
UB3 - 1/16 horse power nominal capacity
Factory pre set for optimum performance
240 volts, 50Hz power supply with 2 metre hose with 3 pin plug
Dimensions and Weight Packed
UB1- 315mmW x 365mmH x 415mmD 21.5kg
UB2- 340mmW x 535mmH x 415mmD 13kg
It is recommended all products be vented to allow maximum air surrounding compressor