A 2 litre tank is incorporated within the chilling chamber to meet peak usage periods. The tank is made from hard drawn copper which has been tin plated for safety. The chilling capacity is 26 litres per hour .
The system uses 275gms of refrigerant R22. It is nontoxic,non-flammable and environmentally sympathetic.
Water Inlet – 6.4mm (1/4”) copper tube
Water Outlet – 6.4mm (1/4”) copper tube
The thermostat is factory pre-set.
1/4 hp capacity, 370 watts.
The compressor is hermetically sealed for silent running.
The condenser is of copper and expanded aluminium fin.
240 volts, 50Hz. A 2 metre house cable and 3 pin plug is supplied. Full load current is 2.69 amps.
PERFORMANCE TO ARI 1010-94 STANDARD
Water Inlet – 26.7ºC
Water Outlet – 10ºC
Ambient Air – 32.2ºC.
WEIGHT – PACKED
DIMENSIONS – PACKED
50cm long x 20cm wide x 60cm high
Twelve months comprehensive coverage. Five years for compressor replacement
The unit must be installed vertically and there must be a 75mm clearance on all sides to facilitate air flow.